Followup to https://codeberg.org/forgejo/forgejo/pulls/6203
Currently it is logging an error wherever a template is rendered in language that doesn't have all plural strings covered. For example, Esperanto isn't well maintained.
Since more plural strings were migrated in v15 to new format, these errors became much more common. However, for all languages but the base one (English) they are completely harmless and just indicate an incomplete translation.
However, for base (English) they indicate a bug in either template or en-US.json, which should be still logged as an error.
The error is being logged by `LookupPluralByForm`, which is called by `TrPluralStringAllForms` and (`TrPluralString` through `LookupPluralByCount`). I originally intended to just pass log func directly to `LookupPluralByForm` from both, but since `TrPluralString` isn't calling `LookupPluralByForm` directly, it didn't look clean, so I went with passing a flag around instead and implemented logging logic in `LookupPluralByForm` itself.
I little concern is with that the so-called "default lang" is configurable, and if it is configured to something with less than 100% completion, it will cause fallback bugs, as well as a lot of logging of this as an error. But this is why changing "default lang" is a bad idea in the first place, and broken fallbacks should be greater concern than junk in the logs.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/12183
Reviewed-by: Beowulf <beowulf@beocode.eu>
Co-authored-by: 0ko <0ko@noreply.codeberg.org>
Co-committed-by: 0ko <0ko@noreply.codeberg.org>
- The documentation has the correct behavior about `linguist-detectable`: In cases where a file should be considered for language statistics, regardless of its category, the linguist-detectable attribute can be used.
- This patch follows that behavior by not skipping the file even if some heuristic would've said to skip the file.
- Document the conditions in more natural language.
- Resolvesforgejo/forgejo#11248
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/11685
Reviewed-by: Andreas Ahlenstorf <aahlenst@noreply.codeberg.org>
Co-authored-by: Gusted <postmaster@gusted.xyz>
Co-committed-by: Gusted <postmaster@gusted.xyz>
Fixes#11590
When viewing a user's SSH keys, SSH principals are now excluded from the output. This would previously either result in a panic in [OmitEmail](cfd4d53e32/models/asymkey/ssh_key.go (L67)), if the principal name didn't contain any spaces, or truncate the principal name, if it did contain spaces.
The TestExportUserSSHKeys test was also updated and fails if the fix(commit cfcbc33af0) is reverted.
## Checklist
The [contributor guide](https://forgejo.org/docs/next/contributor/) contains information that will be helpful to first time contributors. All work and communication must conform to Forgejo's [AI Agreement](https://codeberg.org/forgejo/governance/src/branch/main/AIAgreement.md). There also are a few [conditions for merging Pull Requests in Forgejo repositories](https://codeberg.org/forgejo/governance/src/branch/main/PullRequestsAgreement.md). You are also welcome to join the [Forgejo development chatroom](https://matrix.to/#/#forgejo-development:matrix.org).
### Tests for Go changes
- I added test coverage for Go changes...
- [ ] in their respective `*_test.go` for unit tests.
- [x] in the `tests/integration` directory if it involves interactions with a live Forgejo server.
- I ran...
- [x] `make pr-go` before pushing
- [x] `make test`
- [x] `make test-sqlite#TestExportUserSSHKeys`
I have also manually tested the change.
The full integration tests(`make test-sqlite`) report some errors, but I get the same errors without this PR(tested on commit [6a5dda7116](6a5dda7116)).
I have not tested with the other database backends.
### Documentation
- [ ] I created a pull request [to the documentation](https://codeberg.org/forgejo/docs) to explain to Forgejo users how to use this change.
- [x] I did not document these changes and I do not expect someone else to do it.
### Release notes
- [x] This change will be noticed by a Forgejo user or admin (feature, bug fix, performance, etc.). I suggest to include a release note for this change.
- [ ] This change is not visible to a Forgejo user or admin (refactor, dependency upgrade, etc.). I think there is no need to add a release note for this change.
*The decision if the pull request will be shown in the release notes is up to the mergers / release team.*
The content of the `release-notes/<pull request number>.md` file will serve as the basis for the release notes. If the file does not exist, the title of the pull request will be used instead.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/12079
Reviewed-by: Mathieu Fenniak <mfenniak@noreply.codeberg.org>
Co-authored-by: Alec Walsh <code@alecwalsh.name>
Co-committed-by: Alec Walsh <code@alecwalsh.name>
I tried a lot, but this seems to work. I know it is ugly, but checking and waiting after every action seems to make it stable. At least it succeeded five times in a row and the CI seemed to be under load due to the dependency updates. Maybe it is worth a try...
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/12151
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Allow for filtering users with 2fa enabled as admin. So that it is easy to audit users' settings compliance with iso27001, etc.
Resolves#11800
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/12091
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: Dominik Zyla <zylad@noreply.codeberg.org>
Co-committed-by: Dominik Zyla <zylad@noreply.codeberg.org>
API calls to `.../api/v1/repos/search?uid=-2&archived=false` currently do not apply the filter `uid` because of the negative value. This can occur when APIs are interacting with `${{ forgejo.token }}` and believe they're operating as the Forgejo Actions user, which has UID -2.
In combination with the security checks that occur in the `/repos/search` API to validate that repositories accessed are visible to the user, this can result in 500 error responses when a more correct expectation would be to receive no repositories:
da8898822c/routers/api/v1/repo/repo.go (L237-L242)
## Checklist
The [contributor guide](https://forgejo.org/docs/next/contributor/) contains information that will be helpful to first time contributors. All work and communication must conform to Forgejo's [AI Agreement](https://codeberg.org/forgejo/governance/src/branch/main/AIAgreement.md). There also are a few [conditions for merging Pull Requests in Forgejo repositories](https://codeberg.org/forgejo/governance/src/branch/main/PullRequestsAgreement.md). You are also welcome to join the [Forgejo development chatroom](https://matrix.to/#/#forgejo-development:matrix.org).
### Tests for Go changes
- I added test coverage for Go changes...
- [ ] in their respective `*_test.go` for unit tests.
- [x] in the `tests/integration` directory if it involves interactions with a live Forgejo server.
- I ran...
- [x] `make pr-go` before pushing
### Documentation
- [ ] I created a pull request [to the documentation](https://codeberg.org/forgejo/docs) to explain to Forgejo users how to use this change.
- [x] I did not document these changes and I do not expect someone else to do it.
### Release notes
- [x] This change will be noticed by a Forgejo user or admin (feature, bug fix, performance, etc.). I suggest to include a release note for this change.
- [ ] This change is not visible to a Forgejo user or admin (refactor, dependency upgrade, etc.). I think there is no need to add a release note for this change.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/12144
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: Mathieu Fenniak <mathieu@fenniak.net>
Co-committed-by: Mathieu Fenniak <mathieu@fenniak.net>
Prevent continued execution of some APIs with error responses that didn't correctly interrupt execution, resulting in bizarre outputs and possibly leaking secure data:
```
> GET /api/v1/repos/search?uid=-2&archived=false HTTP/2
> Host: example.org
> user-agent: curl/7.88.1
> accept: */*
> authorization: bearer ***
>
< HTTP/2 500
< server: nginx
< date: Thu, 16 Apr 2026 14:20:09 GMT
< content-type: application/json;charset=utf-8
< cache-control: max-age=0, private, must-revalidate, no-transform
< x-content-type-options: nosniff
< x-frame-options: SAMEORIGIN
<
{"message":"","url":"https://example.org/api/swagger"}
{"message":"","url":"https://example.org/api/swagger"}
{"message":"","url":"https://example.org/api/swagger"}
{"message":"","url":"https://example.org/api/swagger"}
{"message":"","url":"https://example.org/api/swagger"}
{"message":"","url":"https://example.org/api/swagger"}
{"message":"","url":"https://example.org/api/swagger"}
{"message":"","url":"https://example.org/api/swagger"}
{"message":"","url":"https://example.org/api/swagger"}
{"message":"","url":"https://example.org/api/swagger"}
{"message":"","url":"https://example.org/api/swagger"}
{"message":"","url":"https://example.org/api/swagger"}
{"message":"","url":"https://example.org/api/swagger"}
{"message":"","url":"https://example.org/api/swagger"}
{"ok":true,"data":[{"id":68,"owner":{"id":1,"login":"mfenniak", ...
```
As these errors only occur on situations that shouldn't be reproducible (minus software bugs), test automation isn't practical.
## Checklist
The [contributor guide](https://forgejo.org/docs/next/contributor/) contains information that will be helpful to first time contributors. All work and communication must conform to Forgejo's [AI Agreement](https://codeberg.org/forgejo/governance/src/branch/main/AIAgreement.md). There also are a few [conditions for merging Pull Requests in Forgejo repositories](https://codeberg.org/forgejo/governance/src/branch/main/PullRequestsAgreement.md). You are also welcome to join the [Forgejo development chatroom](https://matrix.to/#/#forgejo-development:matrix.org).
### Tests for Go changes
- I added test coverage for Go changes...
- [ ] in their respective `*_test.go` for unit tests.
- [ ] in the `tests/integration` directory if it involves interactions with a live Forgejo server.
- I ran...
- [ ] `make pr-go` before pushing
### Documentation
- [ ] I created a pull request [to the documentation](https://codeberg.org/forgejo/docs) to explain to Forgejo users how to use this change.
- [x] I did not document these changes and I do not expect someone else to do it.
### Release notes
- [ ] This change will be noticed by a Forgejo user or admin (feature, bug fix, performance, etc.). I suggest to include a release note for this change.
- [x] This change is not visible to a Forgejo user or admin (refactor, dependency upgrade, etc.). I think there is no need to add a release note for this change.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/12143
Reviewed-by: Andreas Ahlenstorf <aahlenst@noreply.codeberg.org>
Reviewed-by: Cyborus <cyborus@disroot.org>
Co-authored-by: Mathieu Fenniak <mathieu@fenniak.net>
Co-committed-by: Mathieu Fenniak <mathieu@fenniak.net>
This was missed in https://codeberg.org/forgejo/forgejo/pulls/11098.
See https://github.com/go-gitea/gitea/pull/17846 for why this was added in the first place.
Note that this is not backwards compatible. For users with a custom `app.ini`-config this won't work. But it also didn't work with the previous config. This change only aligns it with the default app.ini-path.
Co-authored-by: Jakob Linskeseder <jakob@linskeseder.com>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/11720
Reviewed-by: Beowulf <beowulf@beocode.eu>
Reviewed-by: Michael Kriese <michael.kriese@gmx.de>
Co-authored-by: jaylinski <jaylinski@noreply.codeberg.org>
Co-committed-by: jaylinski <jaylinski@noreply.codeberg.org>
`TestMirrorPull` is currently failing when run on git 2.34.1 in the `testing-integration.yml` workflow: https://codeberg.org/forgejo-integration/forgejo/actions/runs/16661/jobs/1/attempt/1#jobstep-5-2539 Began to fail after #11909 when additional checks on pull mirror configuration was added.
This PR addresses the issue and has been manually tested against the same git version:
```
$ git --version
git version 2.34.1
$ make test-sqlite#TestMirrorPull 2>&1
...
=== TestMirrorPull/migrate_from_repo_config_credentials (tests/integration/mirror_pull_test.go:238)
PASS
```
## Checklist
The [contributor guide](https://forgejo.org/docs/next/contributor/) contains information that will be helpful to first time contributors. All work and communication must conform to Forgejo's [AI Agreement](https://codeberg.org/forgejo/governance/src/branch/main/AIAgreement.md). There also are a few [conditions for merging Pull Requests in Forgejo repositories](https://codeberg.org/forgejo/governance/src/branch/main/PullRequestsAgreement.md). You are also welcome to join the [Forgejo development chatroom](https://matrix.to/#/#forgejo-development:matrix.org).
### Documentation
- [ ] I created a pull request [to the documentation](https://codeberg.org/forgejo/docs) to explain to Forgejo users how to use this change.
- [x] I did not document these changes and I do not expect someone else to do it.
### Release notes
- [ ] This change will be noticed by a Forgejo user or admin (feature, bug fix, performance, etc.). I suggest to include a release note for this change.
- [x] This change is not visible to a Forgejo user or admin (refactor, dependency upgrade, etc.). I think there is no need to add a release note for this change.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/12134
Reviewed-by: Michael Kriese <michael.kriese@gmx.de>
Reviewed-by: Beowulf <beowulf@beocode.eu>
Co-authored-by: Mathieu Fenniak <mathieu@fenniak.net>
Co-committed-by: Mathieu Fenniak <mathieu@fenniak.net>
- shrink runner list width (use icons, move details link to runner name)
- add owner to runner details on admin view
- #11516 removed a lot details which makes it much harder for an admin to find a specific runner
---
### admin list
### admin org runner details
### admin repo runner
### individual list
### individual runner details
### tooltips for edit and delete
 
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/12113
Reviewed-by: 0ko <0ko@noreply.codeberg.org>
Co-authored-by: Michael Kriese <michael.kriese@visualon.de>
Co-committed-by: Michael Kriese <michael.kriese@visualon.de>
While developing tests for #12092, I came across a case where making a comment on a single-commit doesn't include the correct diff for the comment. This is because code comment placement occurs between the PR's base and the commit being viewed, but, that diff could be different from the commit's parent to the commit, which is what is being viewed on a single-commit diff.
Similar to #12055, this PR changes code comments to be more precise in their diff generation by providing the backend with both the base commit (`before_commit_id`) and head commit (`after_commit_id`) currently being viewed. As a result, the diffs attached to comments should exactly match the diffs being viewed by the user when the comment was placed.
## Checklist
The [contributor guide](https://forgejo.org/docs/next/contributor/) contains information that will be helpful to first time contributors. All work and communication must conform to Forgejo's [AI Agreement](https://codeberg.org/forgejo/governance/src/branch/main/AIAgreement.md). There also are a few [conditions for merging Pull Requests in Forgejo repositories](https://codeberg.org/forgejo/governance/src/branch/main/PullRequestsAgreement.md). You are also welcome to join the [Forgejo development chatroom](https://matrix.to/#/#forgejo-development:matrix.org).
### Tests for Go changes
- I added test coverage for Go changes...
- [ ] in their respective `*_test.go` for unit tests.
- [x] in the `tests/integration` directory if it involves interactions with a live Forgejo server.
- I ran...
- [x] `make pr-go` before pushing
### Documentation
- [ ] I created a pull request [to the documentation](https://codeberg.org/forgejo/docs) to explain to Forgejo users how to use this change.
- [x] I did not document these changes and I do not expect someone else to do it.
### Release notes
- [x] This change will be noticed by a Forgejo user or admin (feature, bug fix, performance, etc.). I suggest to include a release note for this change.
- [ ] This change is not visible to a Forgejo user or admin (refactor, dependency upgrade, etc.). I think there is no need to add a release note for this change.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/12107
Reviewed-by: Andreas Ahlenstorf <aahlenst@noreply.codeberg.org>
Co-authored-by: Mathieu Fenniak <mathieu@fenniak.net>
Co-committed-by: Mathieu Fenniak <mathieu@fenniak.net>
- It's quite hard to determine when and why this was added here, my best
guess is that this being the "oldest" subcommand at some point loading
the configuration was not unified. Now it is unified in
`prepareWorkPathAndCustomConf` which is run before any subcommand is
run. It determines the work path, custom path and (custom) config and
then loads the settings by calling `LoadCommonSettings`.
- Between `prepareWorkPathAndCustomConf` being called and
`serveInstalled` being called the `setting.CustomConf` is not changed.
There was a possibility this being necessary for install page ->
installed, but the install code already ensures that the new config is
loaded and used.
- Thus calling to load the settings again here is not necessary. There's
a small possibility some settings loading code was written to only work
after being loaded the second time. That's a bug that needs to be fixed,
because all other subcommands does not load the settings twice and would
see a different view of the settings in that case. I don't fear such
code being present here.
- Resolvesforgejo/forgejo#11024
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/12111
Reviewed-by: Mathieu Fenniak <mfenniak@noreply.codeberg.org>
Co-authored-by: Gusted <postmaster@gusted.xyz>
Co-committed-by: Gusted <postmaster@gusted.xyz>
First round of patches to re-enable some lints from my side.
This PR also refactors the general key fetching code quite a bit due to the way it currently worked
with relying on some values being nil sometimes.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/11253
Reviewed-by: elle <0xllx0@noreply.codeberg.org>
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: famfo <famfo@famfo.xyz>
Co-committed-by: famfo <famfo@famfo.xyz>
With the completion of #12015, when a comment is left on a changed line in a pull request, we track the comment against the line of code with `git blame` and then identify where it currently is in any diff with `git blame --reverse`. However, this strategy only works for the *modified* lines of code -- eg. the `+...` in diffs, and not the `-...` in diffs. The reason is that `git blame --reverse` can't track a line of code's location past the commit that it was removed in.
To permit comments that are left on lines of code that are removed to appear correctly in the UI, a separate approach is required for those comments. This PR performs two major changes, which have been complex to figure out, but are reasonably easy to understand:
- When a comment is placed on a removed line in a PR, perform a `git blame --reverse` from the PR's base to the currently viewed commit, and use this information to record in the comment:
- the **last commit that the line of code existed in** (stored in the `commit_sha` field)
- the **line of code as of that commit** (stored in the `line` field, negative, to indicate that the comment is on a removal).
- the **patch** where the comment was placed (stored in the field `patch`); existing functionality unchanged in this PR
- When viewing any diff in the PR, for each comment on a removal, perform a diff from the `commit_sha` (last commit that the line of code existed in) to the current commit being viewed, and verify that within that diff the left-hand-side line removal still exists at the same line of code in the diff, by comparing the current diff with the stored patch.
- If present, place the commit in the UI at the line number.
- If the line of code no longer exists in the diff at that point (for example, it was removed, commented upon, and then re-added in a later commit), then the comment is considered outdated and isn't displayed.
The algorithm used for marking a comment as "outdated" is also updated to use this approach.
## Checklist
The [contributor guide](https://forgejo.org/docs/next/contributor/) contains information that will be helpful to first time contributors. All work and communication must conform to Forgejo's [AI Agreement](https://codeberg.org/forgejo/governance/src/branch/main/AIAgreement.md). There also are a few [conditions for merging Pull Requests in Forgejo repositories](https://codeberg.org/forgejo/governance/src/branch/main/PullRequestsAgreement.md). You are also welcome to join the [Forgejo development chatroom](https://matrix.to/#/#forgejo-development:matrix.org).
### Tests for Go changes
- I added test coverage for Go changes...
- [x] in their respective `*_test.go` for unit tests.
- [x] in the `tests/integration` directory if it involves interactions with a live Forgejo server.
- I ran...
- [x] `make pr-go` before pushing
### Documentation
- [ ] I created a pull request [to the documentation](https://codeberg.org/forgejo/docs) to explain to Forgejo users how to use this change.
- [x] I did not document these changes and I do not expect someone else to do it.
### Release notes
- [x] This change will be noticed by a Forgejo user or admin (feature, bug fix, performance, etc.). I suggest to include a release note for this change.
- [ ] This change is not visible to a Forgejo user or admin (refactor, dependency upgrade, etc.). I think there is no need to add a release note for this change.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/12092
Reviewed-by: Andreas Ahlenstorf <aahlenst@noreply.codeberg.org>
Co-authored-by: Mathieu Fenniak <mathieu@fenniak.net>
Co-committed-by: Mathieu Fenniak <mathieu@fenniak.net>
Fixes https://codeberg.org/forgejo/forgejo/issues/12082 by reverting commit dd968f147d.
## Checklist
The [contributor guide](https://forgejo.org/docs/next/contributor/) contains information that will be helpful to first time contributors. All work and communication must conform to Forgejo's [AI Agreement](https://codeberg.org/forgejo/governance/src/branch/main/AIAgreement.md). There also are a few [conditions for merging Pull Requests in Forgejo repositories](https://codeberg.org/forgejo/governance/src/branch/main/PullRequestsAgreement.md). You are also welcome to join the [Forgejo development chatroom](https://matrix.to/#/#forgejo-development:matrix.org).
### Tests for Go changes
(can be removed for JavaScript changes)
- I added test coverage for Go changes...
- [ ] in their respective `*_test.go` for unit tests.
- [ ] in the `tests/integration` directory if it involves interactions with a live Forgejo server.
- I ran...
- [ ] `make pr-go` before pushing
### Tests for JavaScript changes
(can be removed for Go changes)
- I added test coverage for JavaScript changes...
- [ ] in `web_src/js/*.test.js` if it can be unit tested.
- [ ] in `tests/e2e/*.test.e2e.js` if it requires interactions with a live Forgejo server (see also the [developer guide for JavaScript testing](https://codeberg.org/forgejo/forgejo/src/branch/forgejo/tests/e2e/README.md#end-to-end-tests)).
### Documentation
- [ ] I created a pull request [to the documentation](https://codeberg.org/forgejo/docs) to explain to Forgejo users how to use this change.
- [ ] I did not document these changes and I do not expect someone else to do it.
### Release notes
- [ ] This change will be noticed by a Forgejo user or admin (feature, bug fix, performance, etc.). I suggest to include a release note for this change.
- [ ] This change is not visible to a Forgejo user or admin (refactor, dependency upgrade, etc.). I think there is no need to add a release note for this change.
*The decision if the pull request will be shown in the release notes is up to the mergers / release team.*
The content of the `release-notes/<pull request number>.md` file will serve as the basis for the release notes. If the file does not exist, the title of the pull request will be used instead.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/12088
Reviewed-by: Mathieu Fenniak <mfenniak@noreply.codeberg.org>
Co-authored-by: Henry Catalini Smith <henry@catalinismith.se>
Co-committed-by: Henry Catalini Smith <henry@catalinismith.se>
Currently, forgejo does not support syntax highlighting code-blocks that have comma separated attributes after the language. This is a pattern sometimes seen in Rust code blocks, with tests like this:
\`\`\`rust
#[test]
fn run_this_test() { /* ... */ }
\`\`\`
\`\`\`rust,ignore
#[test]
fn skip_this_test() { /* ... */ }
\`\`\`
Currently, forgejo only does syntax highlighting in the first case:
```rust
#[test]
fn run_this_test() { /* ... */ }
```
```rust,ignore
#[test]
fn skip_this_test() { /* ... */ }
```
An example of this causing problems can be seen in this commit (5be9c5b7d2) causing the following issue (https://codeberg.org/zesterer/ariadne/issues/188).
This PR fixes fixes the second case not getting proper syntax highlighting.
Co-authored-by: TurtleArmy <44322335+TurtleArmyMc@users.noreply.github.com>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/12056
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Reviewed-by: Ellen Εμίλια Άννα Zscheile <fogti@noreply.codeberg.org>
Co-authored-by: TurtleArmy <turtlearmy@noreply.codeberg.org>
Co-committed-by: TurtleArmy <turtlearmy@noreply.codeberg.org>
This is hopefully the final part of PR #4767, rebased and squashed.
More thorough federation tests are at https://code.forgejo.org/forgejo/end-to-end/pulls/1276 but the mock has been extended to hopefully cover a good chunk as well.
Co-authored-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Co-authored-by: Michael Jerger <michael.jerger@meissa-gmbh.de>
Co-authored-by: zam <mirco.zachmann@meissa.de>
Co-authored-by: Panagiotis "Ivory" Vasilopoulos <git@n0toose.net>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/10380
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: famfo <famfo@famfo.xyz>
Co-committed-by: famfo <famfo@famfo.xyz>
When performing `git blame` to identify the commit that a line of code came from, limit the blame to the commit that is currently being viewed in the UI. Before this change, the blame always occurred on the current head of the PR, causing these problems:
- When you click ➕ to load the comment form, the form that is dynamically loaded would have it's commit field pulled from the current PR head. That may not actually reflect the code that you were viewing at the time you authored the comment -- it could be a newer commit that occurred by the author while you were reviewing.
- When viewing a specific commit within a PR and leaving a comment, the blame would occur from the head -- if the file was changed in a later commit and the line-of-code moved up or down, the comment would be misplaced.
## Checklist
The [contributor guide](https://forgejo.org/docs/next/contributor/) contains information that will be helpful to first time contributors. All work and communication must conform to Forgejo's [AI Agreement](https://codeberg.org/forgejo/governance/src/branch/main/AIAgreement.md). There also are a few [conditions for merging Pull Requests in Forgejo repositories](https://codeberg.org/forgejo/governance/src/branch/main/PullRequestsAgreement.md). You are also welcome to join the [Forgejo development chatroom](https://matrix.to/#/#forgejo-development:matrix.org).
### Tests for Go changes
- I added test coverage for Go changes...
- [ ] in their respective `*_test.go` for unit tests.
- [x] in the `tests/integration` directory if it involves interactions with a live Forgejo server.
- I ran...
- [ ] `make pr-go` before pushing
### Documentation
- [ ] I created a pull request [to the documentation](https://codeberg.org/forgejo/docs) to explain to Forgejo users how to use this change.
- [x] I did not document these changes and I do not expect someone else to do it.
### Release notes
- [x] This change will be noticed by a Forgejo user or admin (feature, bug fix, performance, etc.). I suggest to include a release note for this change.
- [ ] This change is not visible to a Forgejo user or admin (refactor, dependency upgrade, etc.). I think there is no need to add a release note for this change.
<!--start release-notes-assistant-->
## Release notes
<!--URL:https://codeberg.org/forgejo/forgejo-->
- Bug fixes
- [PR](https://codeberg.org/forgejo/forgejo/pulls/12055): <!--number 12055 --><!--line 0 --><!--description d2hlbiByZXZpZXdpbmcgaW4gUFJzLCBtYWtlIGNvbW1lbnRzIHJlbGF0aXZlIHRvIHRoZSB2aXNpYmxlIGNvZGUncyBjb21taXQ=-->when reviewing in PRs, make comments relative to the visible code's commit<!--description-->
<!--end release-notes-assistant-->
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/12055
Reviewed-by: Andreas Ahlenstorf <aahlenst@noreply.codeberg.org>
Co-authored-by: Mathieu Fenniak <mathieu@fenniak.net>
Co-committed-by: Mathieu Fenniak <mathieu@fenniak.net>
Currently when a commit is pushed to a branch, code comments are marked as Outdated if a `git blame` on the current commit's code returns the same commit as the `git blame` did when the comment was originally created. This implementation doesn't make sense:
- It doesn't handle the case correctly where the same line of code exists unaltered in the new commit, but it has been relocated (eg. new lines entered or removed above the location).
- It falsely keeps the commit valid if the line of code that the comment was made upon has been removed, if, coincidentally, the line of code that now exists at the commit came from the same source commit. For example, if the line of code that the comment was on was deleted, but the next line of code came from the same commit, the comment will be kept as valid.
This PR uses the logic introduced in #12015, using a `git blame --reverse` -- the commit & line that was identified as having the comment on it is reversed, and if it still exists in the new head, then the comment is considered valid. Otherwise it is marked as outdated.
Automated tests are added primarily by revising the automated tests in #12015 -- a comment in an existing test case was marked as outdated, even though it shouldn't have been.
## Checklist
The [contributor guide](https://forgejo.org/docs/next/contributor/) contains information that will be helpful to first time contributors. All work and communication must conform to Forgejo's [AI Agreement](https://codeberg.org/forgejo/governance/src/branch/main/AIAgreement.md). There also are a few [conditions for merging Pull Requests in Forgejo repositories](https://codeberg.org/forgejo/governance/src/branch/main/PullRequestsAgreement.md). You are also welcome to join the [Forgejo development chatroom](https://matrix.to/#/#forgejo-development:matrix.org).
### Tests for Go changes
- I added test coverage for Go changes...
- [ ] in their respective `*_test.go` for unit tests.
- [x] in the `tests/integration` directory if it involves interactions with a live Forgejo server.
- I ran...
- [x] `make pr-go` before pushing
### Documentation
- [ ] I created a pull request [to the documentation](https://codeberg.org/forgejo/docs) to explain to Forgejo users how to use this change.
- [x] I did not document these changes and I do not expect someone else to do it.
### Release notes
- [x] This change will be noticed by a Forgejo user or admin (feature, bug fix, performance, etc.). I suggest to include a release note for this change.
- [ ] This change is not visible to a Forgejo user or admin (refactor, dependency upgrade, etc.). I think there is no need to add a release note for this change.
<!--start release-notes-assistant-->
## Release notes
<!--URL:https://codeberg.org/forgejo/forgejo-->
- Bug fixes
- [PR](https://codeberg.org/forgejo/forgejo/pulls/12054): <!--number 12054 --><!--line 0 --><!--description bWFyayBjb2RlIGNvbW1lbnRzIGFzIE91dGRhdGVkIGJhc2VkIHVwb24gbGluZS1vZi1jb2RlIGV4aXN0ZW5jZSBpbiBjdXJyZW50IFBSIGNvbW1pdA==-->mark code comments as Outdated based upon line-of-code existence in current PR commit<!--description-->
<!--end release-notes-assistant-->
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/12054
Reviewed-by: Andreas Ahlenstorf <aahlenst@noreply.codeberg.org>
Co-authored-by: Mathieu Fenniak <mathieu@fenniak.net>
Co-committed-by: Mathieu Fenniak <mathieu@fenniak.net>
When a review comment is placed on a PR in Forgejo, Forgejo performs a `git blame` to identify which commit originated the line, and records that commit and line number in the comment's database record. Later when the review is viewed, Forgejo currently makes no effort to place that comment in the correct *current* location, which may vary -- for example, if a PR had two commits and the comment was made on a line in the first commit, but the second commit changes line numbers in that file, the comment will appear in the incorrect location.
This PR adds the usage of `git blame --reverse` to calculate the correct location to display the comment in the current view (whether reviewing the PR commit-by-commit, or "Files changed"). It certainly does not fix all problems with comment placement (see comments).
Another major addition in this PR is a test harness for making relatively complex PRs and reviewing the diffs on the per-commit view and PR-diff views.
## Checklist
The [contributor guide](https://forgejo.org/docs/next/contributor/) contains information that will be helpful to first time contributors. All work and communication must conform to Forgejo's [AI Agreement](https://codeberg.org/forgejo/governance/src/branch/main/AIAgreement.md). There also are a few [conditions for merging Pull Requests in Forgejo repositories](https://codeberg.org/forgejo/governance/src/branch/main/PullRequestsAgreement.md). You are also welcome to join the [Forgejo development chatroom](https://matrix.to/#/#forgejo-development:matrix.org).
### Tests for Go changes
- I added test coverage for Go changes...
- [x] in their respective `*_test.go` for unit tests.
- [x] in the `tests/integration` directory if it involves interactions with a live Forgejo server.
- I ran...
- [ ] `make pr-go` before pushing
### Documentation
- [ ] I created a pull request [to the documentation](https://codeberg.org/forgejo/docs) to explain to Forgejo users how to use this change.
- [x] I did not document these changes and I do not expect someone else to do it.
### Release notes
- [x] This change will be noticed by a Forgejo user or admin (feature, bug fix, performance, etc.). I suggest to include a release note for this change.
- [ ] This change is not visible to a Forgejo user or admin (refactor, dependency upgrade, etc.). I think there is no need to add a release note for this change.
<!--start release-notes-assistant-->
## Release notes
<!--URL:https://codeberg.org/forgejo/forgejo-->
- Bug fixes
- [PR](https://codeberg.org/forgejo/forgejo/pulls/12015): <!--number 12015 --><!--line 0 --><!--description cmVsb2NhdGUgUFIgcmV2aWV3IGNvbW1lbnRzIHVzaW5nIGBnaXQgYmxhbWUgLS1yZXZlcnNlYCwgaW1wcm92aW5nIGNvbW1lbnQgcGxhY2VtZW50-->relocate PR review comments using `git blame --reverse`, improving comment placement<!--description-->
<!--end release-notes-assistant-->
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/12015
Reviewed-by: Andreas Ahlenstorf <aahlenst@noreply.codeberg.org>
Co-authored-by: Mathieu Fenniak <mathieu@fenniak.net>
Co-committed-by: Mathieu Fenniak <mathieu@fenniak.net>
This PR contains the following updates:
| Package | Update | Change |
|---|---|---|
| [data.forgejo.org/forgejo/forgejo](https://forgejo.org) ([source](https://codeberg.org/forgejo/forgejo)) | patch | `11.0.11` → `11.0.12` |
---
### Release Notes
<details>
<summary>forgejo/forgejo (data.forgejo.org/forgejo/forgejo)</summary>
### [`v11.0.12`](https://codeberg.org/forgejo/forgejo/releases/tag/v11.0.12)
[Compare Source](https://codeberg.org/forgejo/forgejo/compare/v11.0.11...v11.0.12)
See <https://codeberg.org/forgejo/forgejo/src/branch/forgejo/release-notes-published/11.0.12.md>
</details>
---
### Configuration
📅 **Schedule**: (UTC)
- Branch creation
- Between 12:00 AM and 03:59 AM (`* 0-3 * * *`)
- Automerge
- Between 12:00 AM and 03:59 AM (`* 0-3 * * *`)
🚦 **Automerge**: Disabled by config. Please merge this manually once you are satisfied.
♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox.
🔕 **Ignore**: Close this PR and you won't be reminded about this update again.
---
- [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check this box
---
This PR has been generated by [Renovate Bot](https://github.com/renovatebot/renovate).
<!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiI0My4xMDQuNCIsInVwZGF0ZWRJblZlciI6IjQzLjEwNC40IiwidGFyZ2V0QnJhbmNoIjoiZm9yZ2VqbyIsImxhYmVscyI6WyJkZXBlbmRlbmN5LXVwZ3JhZGUiLCJ0ZXN0L25vdC1uZWVkZWQiXX0=-->
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/12084
Reviewed-by: Mathieu Fenniak <mfenniak@noreply.codeberg.org>
Co-authored-by: Renovate Bot <bot@kriese.eu>
Co-committed-by: Renovate Bot <bot@kriese.eu>
