Backport: #11341
Trivial conflict resolution: commit contained changes to org-members.test.e2e not directly related to the fix. The file is exclusive to v15, so these changes were dropped in the backport.
---
Fixes#11268
Fixes regression of #9614
Calling `initDisabledInputs` wasn't effective for template contents, so inputs in MDEs spawned by repo-legacy.js on comment editing were broken. Now repo-legacy.js also calls it when it spawns a new MDE.
Co-authored-by: Gusted <Gusted@noreply.codeberg.org>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/11341
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: 0ko <0ko@noreply.codeberg.org>
Co-committed-by: 0ko <0ko@noreply.codeberg.org>
(cherry picked from commit a0faae2764)
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/11499
Reviewed-by: Michael Kriese <michael.kriese@gmx.de>
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
**Backport:** https://codeberg.org/forgejo/forgejo/pulls/11179
As noted in https://codeberg.org/forgejo/forgejo/issues/10900#issuecomment-10339634, `TestAPICreateIssueParallel` is failing intermittently in Forgejo CI. Based upon this intermittent failure, I've made these changes:
- Increase the parallel run of the test from 10 instances to 100, which caused this test to fail consistently and reliably on my dev workstation. The test execution time at 100 parallel invocations is only ~4 seconds.
- Increase the default `SQLITE_TIMEOUT` from 500ms to 60s, which caused this test to succeed consistently in CI.
Co-authored-by: Mathieu Fenniak <mathieu@fenniak.net>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/11220
Reviewed-by: Mathieu Fenniak <mfenniak@noreply.codeberg.org>
Reviewed-by: Michael Kriese <michael.kriese@gmx.de>
Co-authored-by: forgejo-backport-action <forgejo-backport-action@noreply.codeberg.org>
Co-committed-by: forgejo-backport-action <forgejo-backport-action@noreply.codeberg.org>
**Backport:** https://codeberg.org/forgejo/forgejo/pulls/11134Fixes#11125. When a PR is closed, cancel any action runs associated with the pull request that are not approved so that they do not remain in the Actions list as a blocked action.
## Checklist
The [contributor guide](https://forgejo.org/docs/next/contributor/) contains information that will be helpful to first time contributors. There also are a few [conditions for merging Pull Requests in Forgejo repositories](https://codeberg.org/forgejo/governance/src/branch/main/PullRequestsAgreement.md). You are also welcome to join the [Forgejo development chatroom](https://matrix.to/#/#forgejo-development:matrix.org).
### Tests
- I added test coverage for Go changes...
- [x] in their respective `*_test.go` for unit tests.
- [x] in the `tests/integration` directory if it involves interactions with a live Forgejo server.
- I added test coverage for JavaScript changes...
- [ ] in `web_src/js/*.test.js` if it can be unit tested.
- [ ] in `tests/e2e/*.test.e2e.js` if it requires interactions with a live Forgejo server (see also the [developer guide for JavaScript testing](https://codeberg.org/forgejo/forgejo/src/branch/forgejo/tests/e2e/README.md#end-to-end-tests)).
### Documentation
- [ ] I created a pull request [to the documentation](https://codeberg.org/forgejo/docs) to explain to Forgejo users how to use this change.
- [x] I did not document these changes and I do not expect someone else to do it.
### Release notes
- [x] This change will be noticed by a Forgejo user or admin (feature, bug fix, performance, etc.). I suggest to include a release note for this change.
- [ ] This change is not visible to a Forgejo user or admin (refactor, dependency upgrade, etc.). I think there is no need to add a release note for this change.
*The decision if the pull request will be shown in the release notes is up to the mergers / release team.*
The content of the `release-notes/<pull request number>.md` file will serve as the basis for the release notes. If the file does not exist, the title of the pull request will be used instead.
Co-authored-by: Mathieu Fenniak <mathieu@fenniak.net>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/11135
Reviewed-by: Mathieu Fenniak <mfenniak@noreply.codeberg.org>
Co-authored-by: forgejo-backport-action <forgejo-backport-action@noreply.codeberg.org>
Co-committed-by: forgejo-backport-action <forgejo-backport-action@noreply.codeberg.org>
**Backport:** https://codeberg.org/forgejo/forgejo/pulls/10969
The custom styles for tippy-enabled menus had too broad selectors, conflicting with styles of other .item elements in tippy boxes.
Co-authored-by: 0ko <0ko@noreply.codeberg.org>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/10996
Reviewed-by: 0ko <0ko@noreply.codeberg.org>
Co-authored-by: forgejo-backport-action <forgejo-backport-action@noreply.codeberg.org>
Co-committed-by: forgejo-backport-action <forgejo-backport-action@noreply.codeberg.org>
**Backport:** https://codeberg.org/forgejo/forgejo/pulls/10964
- `CodeSearchMode` was is now set when keyword is empty
- The default value for search mode should be exact, use fuzzy ONLY when fuzziness is enabled in settings
(cherry picked from commit da7ce17533)
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/10970
Reviewed-by: 0ko <0ko@noreply.codeberg.org>
Co-authored-by: Shiny Nematoda <snematoda.751k2@aleeas.com>
Co-committed-by: Shiny Nematoda <snematoda.751k2@aleeas.com>
**Backport:** https://codeberg.org/forgejo/forgejo/pulls/10925
## Checklist
The [contributor guide](https://forgejo.org/docs/next/contributor/) contains information that will be helpful to first time contributors. There also are a few [conditions for merging Pull Requests in Forgejo repositories](https://codeberg.org/forgejo/governance/src/branch/main/PullRequestsAgreement.md). You are also welcome to join the [Forgejo development chatroom](https://matrix.to/#/#forgejo-development:matrix.org).
### Tests
- I added test coverage for Go changes...
- [ ] in their respective `*_test.go` for unit tests.
- [x] in the `tests/integration` directory if it involves interactions with a live Forgejo server.
- I added test coverage for JavaScript changes...
- [ ] in `web_src/js/*.test.js` if it can be unit tested.
- [ ] in `tests/e2e/*.test.e2e.js` if it requires interactions with a live Forgejo server (see also the [developer guide for JavaScript testing](https://codeberg.org/forgejo/forgejo/src/branch/forgejo/tests/e2e/README.md#end-to-end-tests)).
### Documentation
- [ ] I created a pull request [to the documentation](https://codeberg.org/forgejo/docs) to explain to Forgejo users how to use this change.
- [x] I did not document these changes and I do not expect someone else to do it.
### Release notes
- [ ] This change will be noticed by a Forgejo user or admin (feature, bug fix, performance, etc.). I suggest to include a release note for this change.
- [ ] This change is not visible to a Forgejo user or admin (refactor, dependency upgrade, etc.). I think there is no need to add a release note for this change.
*The decision if the pull request will be shown in the release notes is up to the mergers / release team.*
The content of the `release-notes/<pull request number>.md` file will serve as the basis for the release notes. If the file does not exist, the title of the pull request will be used instead.
<!--start release-notes-assistant-->
## Release notes
<!--URL:https://codeberg.org/forgejo/forgejo-->
- Bug fixes
- [PR](https://codeberg.org/forgejo/forgejo/pulls/10949): <!--number 10949 --><!--line 0 --><!--description Zml4KGFwaSk6IGRlZmF1bHQgbmV3IHJlbGVhc2UgJ3RpdGxlJyBmaWVsZCB0byBsYWJlbCBuYW1lLCBpZiBub3QgcHJvdmlkZWQ=-->fix(api): default new release 'title' field to label name, if not provided<!--description-->
<!--end release-notes-assistant-->
Co-authored-by: emilycares <emilydoescare@gmail.com>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/10949
Reviewed-by: Mathieu Fenniak <mfenniak@noreply.codeberg.org>
Co-authored-by: forgejo-backport-action <forgejo-backport-action@noreply.codeberg.org>
Co-committed-by: forgejo-backport-action <forgejo-backport-action@noreply.codeberg.org>
**Backport:** https://codeberg.org/forgejo/forgejo/pulls/10814
The default braunch is configured in the repo settings. Only users with
administrator privileges for the repository can access the repo
settings. When the feature was implemented (72e956b79a),
the button in the branch list was only guarded with a check for repo
write permissions. This means the button is shown to too many users.
If no an user with write, but not admin permissions clicks on the button,
they see just a 404 page. Which is bad UX.
Co-authored-by: Beowulf <beowulf@beocode.eu>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/10826
Reviewed-by: Beowulf <beowulf@beocode.eu>
Reviewed-by: Michael Kriese <michael.kriese@gmx.de>
Co-authored-by: forgejo-backport-action <forgejo-backport-action@noreply.codeberg.org>
Co-committed-by: forgejo-backport-action <forgejo-backport-action@noreply.codeberg.org>
**Backport:** https://codeberg.org/forgejo/forgejo/pulls/10815
- Regression of forgejo/forgejo!9830
- `reqSignIn` means it requires sign-in, but it does not require sign-in (can be hit by visiting large repository) so `ignSignIn` is the better option.
- Resulted in behavior of being redirected to `/user/login` when visiting a repository such as comaps or forgejo when not being logged in.
Co-authored-by: Gusted <postmaster@gusted.xyz>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/10817
Reviewed-by: Mathieu Fenniak <mfenniak@noreply.codeberg.org>
Co-authored-by: forgejo-backport-action <forgejo-backport-action@noreply.codeberg.org>
Co-committed-by: forgejo-backport-action <forgejo-backport-action@noreply.codeberg.org>
Backport: #10744
---
Fix#10714 (introduced in #8438) by silently ignoring large .gitmodules files.
Additionally:
- the limit was bumped from 10KB to 64KB (https://github.com/boostorg/boost/blob/master/.gitmodules has 20KB)
- a warning is shown on the .gitmodules view page if this limit is exceeded
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/10744
Reviewed-by: Michael Kriese <michael.kriese@gmx.de>
Reviewed-by: 0ko <0ko@noreply.codeberg.org>
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: oliverpool <git@olivier.pfad.fr>
Co-committed-by: oliverpool <git@olivier.pfad.fr>
(cherry picked from commit 970b0da24d)
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/10767
Reviewed-by: 0ko <0ko@noreply.codeberg.org>
Reviewed-by: Michael Kriese <michael.kriese@gmx.de>
**Backport:** https://codeberg.org/forgejo/forgejo/pulls/10602
Permits the Forgejo to return multiple tasks to the Runner in one API call, if requested. Fixes#8917.
Related runner PR: https://code.forgejo.org/forgejo/runner/pulls/1245
## Checklist
The [contributor guide](https://forgejo.org/docs/next/contributor/) contains information that will be helpful to first time contributors. There also are a few [conditions for merging Pull Requests in Forgejo repositories](https://codeberg.org/forgejo/governance/src/branch/main/PullRequestsAgreement.md). You are also welcome to join the [Forgejo development chatroom](https://matrix.to/#/#forgejo-development:matrix.org).
### Tests
- I added test coverage for Go changes...
- [ ] in their respective `*_test.go` for unit tests.
- [x] in the `tests/integration` directory if it involves interactions with a live Forgejo server.
- I added test coverage for JavaScript changes...
- [ ] in `web_src/js/*.test.js` if it can be unit tested.
- [ ] in `tests/e2e/*.test.e2e.js` if it requires interactions with a live Forgejo server (see also the [developer guide for JavaScript testing](https://codeberg.org/forgejo/forgejo/src/branch/forgejo/tests/e2e/README.md#end-to-end-tests)).
### Documentation
- [ ] I created a pull request [to the documentation](https://codeberg.org/forgejo/docs) to explain to Forgejo users how to use this change.
- [x] I did not document these changes and I do not expect someone else to do it.
### Release notes
- [ ] I do not want this change to show in the release notes.
- [x] I want the title to show in the release notes with a link to this pull request.
- [ ] I want the content of the `release-notes/<pull request number>.md` to be be used for the release notes instead of the title.
<!--start release-notes-assistant-->
## Release notes
<!--URL:https://codeberg.org/forgejo/forgejo-->
- Features
- [PR](https://codeberg.org/forgejo/forgejo/pulls/10602): <!--number 10602 --><!--line 0 --><!--description cHJvdmlkZSBtdWx0aXBsZSB0YXNrcyB0byBSdW5uZXIgaW4gb25lIEZldGNoVGFzayB3aGVuIHJlcXVlc3RlZA==-->provide multiple tasks to Runner in one FetchTask when requested<!--description-->
<!--end release-notes-assistant-->
Co-authored-by: Mathieu Fenniak <mathieu@fenniak.net>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/10751
Reviewed-by: Michael Kriese <michael.kriese@gmx.de>
Reviewed-by: Mathieu Fenniak <mfenniak@noreply.codeberg.org>
Co-authored-by: forgejo-backport-action <forgejo-backport-action@noreply.codeberg.org>
Co-committed-by: forgejo-backport-action <forgejo-backport-action@noreply.codeberg.org>
**Backport:** https://codeberg.org/forgejo/forgejo/pulls/10713
Attempt to fix intermittent test failure noted in #10633, detailed technical notes in https://codeberg.org/forgejo/forgejo/issues/10633#issuecomment-9571199.
- Failure to cancel the previous processes is now a test error that aborts immediately, preventing 2hr long test runs that won't succeed.
- When the process cancellation fails, the stack trace of all goroutines is printed to help diagnose the cause of any failure to cancel tasks.
- `context.Background()` referenced in the actions notifier is corrected when opening git repos, which seems to be a cause of failure to cancel the tasks -- git subprocesses are spawned from the repo context, which is the background context, and that prevents the context registered in the process manager from cancelling them.
## Checklist
The [contributor guide](https://forgejo.org/docs/next/contributor/) contains information that will be helpful to first time contributors. There also are a few [conditions for merging Pull Requests in Forgejo repositories](https://codeberg.org/forgejo/governance/src/branch/main/PullRequestsAgreement.md). You are also welcome to join the [Forgejo development chatroom](https://matrix.to/#/#forgejo-development:matrix.org).
### Tests
- I added test coverage for Go changes...
- [ ] in their respective `*_test.go` for unit tests.
- [ ] in the `tests/integration` directory if it involves interactions with a live Forgejo server.
- I added test coverage for JavaScript changes...
- [ ] in `web_src/js/*.test.js` if it can be unit tested.
- [ ] in `tests/e2e/*.test.e2e.js` if it requires interactions with a live Forgejo server (see also the [developer guide for JavaScript testing](https://codeberg.org/forgejo/forgejo/src/branch/forgejo/tests/e2e/README.md#end-to-end-tests)).
### Documentation
- [ ] I created a pull request [to the documentation](https://codeberg.org/forgejo/docs) to explain to Forgejo users how to use this change.
- [x] I did not document these changes and I do not expect someone else to do it.
### Release notes
- [x] I do not want this change to show in the release notes.
- [ ] I want the title to show in the release notes with a link to this pull request.
- [ ] I want the content of the `release-notes/<pull request number>.md` to be be used for the release notes instead of the title.
Co-authored-by: Mathieu Fenniak <mathieu@fenniak.net>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/10717
Reviewed-by: Mathieu Fenniak <mfenniak@noreply.codeberg.org>
Co-authored-by: forgejo-backport-action <forgejo-backport-action@noreply.codeberg.org>
Co-committed-by: forgejo-backport-action <forgejo-backport-action@noreply.codeberg.org>
- Replace the [Monaco Editor](https://microsoft.github.io/monaco-editor/)
with [CodeMirror 6](https://codemirror.net/). This editor is used to
facilitate the 'Add file' and 'Edit file' functionality.
- Rationale:
- Monaco editor is a great and powerful editor, however for Forgejo's
purpose it acts more like a small IDE than a code editor and is doing
too much. In my limited user research the usage of editing files via
the web UI is largely for small changes that does not need the
features that Monaco editor provides.
- Monaco editor has no mobile support, Codemirror is very usable on mobile.
- Monaco editor pulls in large dependencies (for language support) and
by replacing it with Codemirror the amount of time that webpack needs
to build the frontend is reduced by 50% (~30s -> ~15s).
- The binary of Forgejo (build with `bindata` tag) is reduced by 2MiB.
- Codemirror is much more lightweight and should be more usable on
less powerful hardware, most notably the lazy loading is much faster
as codemirror uses less javascript.
- Because Codemirror is modular it is much easier to change the
behavior of the code editor if we wish to.
- Drawbacks:
- Codemirror is quite modular and as seen in `package.json` and in
`codeeditor.ts` we have to supply a lot more of its features to have
feature parity with Monaco editor.
- Monaco editor has great integrated language support (features that
an lsp would provide), Codemirror only has such language support to an
extend.
- Monaco editor has its famous command palette (known by many as its
also available in VSCode), this is not available in code mirror.
- Good to note:
- All features that was added on top of the monaco editor (such as
dynamically changing language support depending on the filename)
still works and the theme is based on the VSCode colors which largely
resembles the monaco editor.
- The code editor is still lazy-loaded (this is painfully clear by
reading how imports are passed around in `codeeditor.ts`).
- This change was privately tested by a few people, a few bugs were
found (and fixed) but no major drawbacks were noted for their usage of
the web editor.
- There's a "search" button in the top bar, so that search can be used
on mobile. It is otherwise only accessible via
<kbd>Ctrl</kbd>+<kbd>f</kbd>.
Co-authored-by: Beowulf <beowulf@beocode.eu>
Co-authored-by: Gusted <postmaster@gusted.xyz>
Co-committed-by: Gusted <postmaster@gusted.xyz>
Co-committed-by: Beowulf <beowulf@beocode.eu>
(cherry picked from commit 28e0af23fa)
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/10697
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
**Backport:** https://codeberg.org/forgejo/forgejo/pulls/10642
Currently, there's no way for actions runners to know what version of
Forgejo is running on the server side. This makes it
difficult/impossible to know which features are available and can make
maintaining compatibility tricky.
Let's add the Forgejo server version to the context.
See associated PR in the runner repo: https://code.forgejo.org/forgejo/runner/pulls/1249
Co-authored-by: John Moon <john.moon@vts-i.com>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/10643
Reviewed-by: Mathieu Fenniak <mfenniak@noreply.codeberg.org>
Reviewed-by: Michael Kriese <michael.kriese@gmx.de>
Reviewed-by: Beowulf <beowulf@beocode.eu>
Co-authored-by: forgejo-backport-action <forgejo-backport-action@noreply.codeberg.org>
Co-committed-by: forgejo-backport-action <forgejo-backport-action@noreply.codeberg.org>
**Backport:** https://codeberg.org/forgejo/forgejo/pulls/10572
When new content is added via JS and htmx is not used for this change,
htmx need to be informed that DOM changes happened and that it needs to
reprocess the DOM (or at least the changed parts).
When a diff is really large, it is hidden by default. The user can press
a button to load the diff, which then will be added via JS.
The diff contains buttons to expand it, which are using htmx behind the
scenes. Therefore a reprocessing via htmx needs to be triggered after
adding the large diff.
Fixes#10570
Co-authored-by: Beowulf <beowulf@beocode.eu>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/10630
Reviewed-by: Beowulf <beowulf@beocode.eu>
Co-authored-by: forgejo-backport-action <forgejo-backport-action@noreply.codeberg.org>
Co-committed-by: forgejo-backport-action <forgejo-backport-action@noreply.codeberg.org>
**Backport:** https://codeberg.org/forgejo/forgejo/pulls/10594Fixes#10589.
## Checklist
The [contributor guide](https://forgejo.org/docs/next/contributor/) contains information that will be helpful to first time contributors. There also are a few [conditions for merging Pull Requests in Forgejo repositories](https://codeberg.org/forgejo/governance/src/branch/main/PullRequestsAgreement.md). You are also welcome to join the [Forgejo development chatroom](https://matrix.to/#/#forgejo-development:matrix.org).
### Tests
- I added test coverage for Go changes...
- [ ] in their respective `*_test.go` for unit tests.
- [x] in the `tests/integration` directory if it involves interactions with a live Forgejo server.
- I added test coverage for JavaScript changes...
- [ ] in `web_src/js/*.test.js` if it can be unit tested.
- [ ] in `tests/e2e/*.test.e2e.js` if it requires interactions with a live Forgejo server (see also the [developer guide for JavaScript testing](https://codeberg.org/forgejo/forgejo/src/branch/forgejo/tests/e2e/README.md#end-to-end-tests)).
### Documentation
- [ ] I created a pull request [to the documentation](https://codeberg.org/forgejo/docs) to explain to Forgejo users how to use this change.
- [x] I did not document these changes and I do not expect someone else to do it.
### Release notes
- [ ] I do not want this change to show in the release notes.
- [x] I want the title to show in the release notes with a link to this pull request.
- [ ] I want the content of the `release-notes/<pull request number>.md` to be be used for the release notes instead of the title.
Co-authored-by: Mathieu Fenniak <mathieu@fenniak.net>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/10600
Reviewed-by: Mathieu Fenniak <mfenniak@noreply.codeberg.org>
Co-authored-by: forgejo-backport-action <forgejo-backport-action@noreply.codeberg.org>
Co-committed-by: forgejo-backport-action <forgejo-backport-action@noreply.codeberg.org>
**Backport:** https://codeberg.org/forgejo/forgejo/pulls/10587
Intermittent test failure ([example](https://codeberg.org/forgejo/forgejo/actions/runs/125874/jobs/9/attempt/1)):
```
=== TestAdminViewRepos (tests/test_utils.go:327)
--- FAIL: TestAdminViewRepos (0.39s)
testlogger.go:411: 2025/12/26 15:21:27 ...les/storage/local.go:33:NewLocalStorage() [I] Creating new Local Storage at /workspace/forgejo/forgejo/tests/gitea-lfs-meta
testlogger.go:411: 2025/12/26 15:21:27 ...eb/routing/logger.go:102:func1() [I] router: completed POST /user/login for test-mock:12345, 303 See Other in 4.7ms @ auth/auth.go:178(auth.SignInPost)
testlogger.go:411: 2025/12/26 15:21:27 ...eb/routing/logger.go:102:func1() [I] router: completed GET /admin/repos for test-mock:12345, 200 OK in 75.1ms @ admin/repos.go:29(admin.Repos)
admin_repo_test.go:29:
Error Trace: /workspace/forgejo/forgejo/tests/integration/admin_repo_test.go:29
Error: Not equal:
expected: 1
actual : 0
Test: TestAdminViewRepos
admin_repo_test.go:30:
Error Trace: /workspace/forgejo/forgejo/tests/integration/admin_repo_test.go:30
Error: Not equal:
expected: "repo49"
actual : ""
Diff:
--- Expected
+++ Actual
@@ -1 +1 @@
-repo49
+
Test: TestAdminViewRepos
```
Cause: the page is displaying 50 out of 65 repos in the fixture with a default sort of "recently updated"; on PostgreSQL that is occasionally causing the target link not to appear on the first page. As a fix, I've switched the test to load with reverse alphabetical order which should cause it to consistently appear on the first page.
## Checklist
The [contributor guide](https://forgejo.org/docs/next/contributor/) contains information that will be helpful to first time contributors. There also are a few [conditions for merging Pull Requests in Forgejo repositories](https://codeberg.org/forgejo/governance/src/branch/main/PullRequestsAgreement.md). You are also welcome to join the [Forgejo development chatroom](https://matrix.to/#/#forgejo-development:matrix.org).
### Tests
- I added test coverage for Go changes...
- [x] in their respective `*_test.go` for unit tests.
- [ ] in the `tests/integration` directory if it involves interactions with a live Forgejo server.
- I added test coverage for JavaScript changes...
- [ ] in `web_src/js/*.test.js` if it can be unit tested.
- [ ] in `tests/e2e/*.test.e2e.js` if it requires interactions with a live Forgejo server (see also the [developer guide for JavaScript testing](https://codeberg.org/forgejo/forgejo/src/branch/forgejo/tests/e2e/README.md#end-to-end-tests)).
### Documentation
- [ ] I created a pull request [to the documentation](https://codeberg.org/forgejo/docs) to explain to Forgejo users how to use this change.
- [x] I did not document these changes and I do not expect someone else to do it.
### Release notes
- [x] I do not want this change to show in the release notes.
- [ ] I want the title to show in the release notes with a link to this pull request.
- [ ] I want the content of the `release-notes/<pull request number>.md` to be be used for the release notes instead of the title.
Co-authored-by: Mathieu Fenniak <mathieu@fenniak.net>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/10592
Reviewed-by: Mathieu Fenniak <mfenniak@noreply.codeberg.org>
Co-authored-by: forgejo-backport-action <forgejo-backport-action@noreply.codeberg.org>
Co-committed-by: forgejo-backport-action <forgejo-backport-action@noreply.codeberg.org>
**Backport:** https://codeberg.org/forgejo/forgejo/pulls/10588
API call `GET /repos/{owner}/{repo}/issues/{index}/times` has no defined ordering implemented in it, causing PostgreSQL to have intermittent test failures on `TestAPIGetTrackedTimes` which expected records to be returned in ID order. ID order is reasonable enough, so this PR adds that ordering.
Fixes#10577.
## Checklist
The [contributor guide](https://forgejo.org/docs/next/contributor/) contains information that will be helpful to first time contributors. There also are a few [conditions for merging Pull Requests in Forgejo repositories](https://codeberg.org/forgejo/governance/src/branch/main/PullRequestsAgreement.md). You are also welcome to join the [Forgejo development chatroom](https://matrix.to/#/#forgejo-development:matrix.org).
### Tests
- I added test coverage for Go changes...
- [ ] in their respective `*_test.go` for unit tests.
- [x] in the `tests/integration` directory if it involves interactions with a live Forgejo server.
- I added test coverage for JavaScript changes...
- [ ] in `web_src/js/*.test.js` if it can be unit tested.
- [ ] in `tests/e2e/*.test.e2e.js` if it requires interactions with a live Forgejo server (see also the [developer guide for JavaScript testing](https://codeberg.org/forgejo/forgejo/src/branch/forgejo/tests/e2e/README.md#end-to-end-tests)).
### Documentation
- [ ] I created a pull request [to the documentation](https://codeberg.org/forgejo/docs) to explain to Forgejo users how to use this change.
- [x] I did not document these changes and I do not expect someone else to do it.
### Release notes
- [ ] I do not want this change to show in the release notes.
- [x] I want the title to show in the release notes with a link to this pull request.
- [ ] I want the content of the `release-notes/<pull request number>.md` to be be used for the release notes instead of the title.
Co-authored-by: Mathieu Fenniak <mathieu@fenniak.net>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/10593
Reviewed-by: Mathieu Fenniak <mfenniak@noreply.codeberg.org>
Co-authored-by: forgejo-backport-action <forgejo-backport-action@noreply.codeberg.org>
Co-committed-by: forgejo-backport-action <forgejo-backport-action@noreply.codeberg.org>
**Backport:** https://codeberg.org/forgejo/forgejo/pulls/8244
The aria-label now changes dynamically depending on whether
the monospace font is enabled or disabled.
Greetings from GPN :)
Fixes#7669.
Co-authored-by: JohnnyJayJay <johnny@leftfold.tech>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/10543
Reviewed-by: Beowulf <beowulf@beocode.eu>
Co-authored-by: forgejo-backport-action <forgejo-backport-action@noreply.codeberg.org>
Co-committed-by: forgejo-backport-action <forgejo-backport-action@noreply.codeberg.org>
**Backport:** https://codeberg.org/forgejo/forgejo/pulls/10394
Previously searching for posters would use full name or username depending on the `[ui].DEFAULT_SHOW_FULL_NAME` setting, now it searches for both of them regardless of the setting.
This also a fixes a bug when `[ui].DEFAULT_SHOW_FULL_NAME=true` that users without a full name where not able to searched for.
Co-authored-by: BtbN <btbn@btbn.de>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/10542
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: forgejo-backport-action <forgejo-backport-action@noreply.codeberg.org>
Co-committed-by: forgejo-backport-action <forgejo-backport-action@noreply.codeberg.org>
**Backport:** https://codeberg.org/forgejo/forgejo/pulls/10520
This is for preventing that a markdown button is recognized as button for submission in a html form.
Buttons can't be stripped from the markdown due to: https://codeberg.org/forgejo/forgejo/pulls/7670#issuecomment-4086608
There is no issue with buttons if they always have `type="button"`, so this should be fine.
This is a "follow-up" to !7670.
Fixes#7656
Co-authored-by: Beowulf <beowulf@beocode.eu>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/10527
Reviewed-by: Beowulf <beowulf@beocode.eu>
Co-authored-by: forgejo-backport-action <forgejo-backport-action@noreply.codeberg.org>
Co-committed-by: forgejo-backport-action <forgejo-backport-action@noreply.codeberg.org>
**Backport:** https://codeberg.org/forgejo/forgejo/pulls/9261
Change that the Cancel button is shown until all jobs are finished and do not hide it, when the first job failed.
Additionally the wrapping of the header was changed.
Fixes#8922
Co-authored-by: Beowulf <beowulf@beocode.eu>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/10531
Reviewed-by: Beowulf <beowulf@beocode.eu>
Reviewed-by: Mathieu Fenniak <mfenniak@noreply.codeberg.org>
Co-authored-by: forgejo-backport-action <forgejo-backport-action@noreply.codeberg.org>
Co-committed-by: forgejo-backport-action <forgejo-backport-action@noreply.codeberg.org>
**Backport:** https://codeberg.org/forgejo/forgejo/pulls/10488Fixes#4712Fixes#7783
When filtering issues or PRs by "Recently updated" or "Least recently updated", the last updated time is shown:
Co-authored-by: Bram Hagens <bram@bramh.me>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/10500
Reviewed-by: 0ko <0ko@noreply.codeberg.org>
Co-authored-by: forgejo-backport-action <forgejo-backport-action@noreply.codeberg.org>
Co-committed-by: forgejo-backport-action <forgejo-backport-action@noreply.codeberg.org>
Remove the unreleased HTTP API for managing runners that was introduced in https://codeberg.org/forgejo/forgejo/pulls/9409. It needs more time to mature. See also https://codeberg.org/forgejo/forgejo/pulls/10450.
## Checklist
The [contributor guide](https://forgejo.org/docs/next/contributor/) contains information that will be helpful to first time contributors. There also are a few [conditions for merging Pull Requests in Forgejo repositories](https://codeberg.org/forgejo/governance/src/branch/main/PullRequestsAgreement.md). You are also welcome to join the [Forgejo development chatroom](https://matrix.to/#/#forgejo-development:matrix.org).
### Tests
- I added test coverage for Go changes...
- [ ] in their respective `*_test.go` for unit tests.
- [ ] in the `tests/integration` directory if it involves interactions with a live Forgejo server.
- I added test coverage for JavaScript changes...
- [ ] in `web_src/js/*.test.js` if it can be unit tested.
- [ ] in `tests/e2e/*.test.e2e.js` if it requires interactions with a live Forgejo server (see also the [developer guide for JavaScript testing](https://codeberg.org/forgejo/forgejo/src/branch/forgejo/tests/e2e/README.md#end-to-end-tests)).
### Documentation
- [ ] I created a pull request [to the documentation](https://codeberg.org/forgejo/docs) to explain to Forgejo users how to use this change.
- [ ] I did not document these changes and I do not expect someone else to do it.
### Release notes
- [ ] I do not want this change to show in the release notes.
- [ ] I want the title to show in the release notes with a link to this pull request.
- [ ] I want the content of the `release-notes/<pull request number>.md` to be be used for the release notes instead of the title.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/10463
Reviewed-by: Michael Kriese <michael.kriese@gmx.de>
Reviewed-by: Mathieu Fenniak <mfenniak@noreply.codeberg.org>
Co-authored-by: Andreas Ahlenstorf <andreas@ahlenstorf.ch>
Co-committed-by: Andreas Ahlenstorf <andreas@ahlenstorf.ch>
We would need to understand LFS over SSH, which is not implemented.
Ref: forgejo/forgejo#5925
Skip pushing LFS when SSH authentication is used.
Resolves: Codeberg/Community#2156
Add a test to verify that you can push mirror a LFS repository
Documentation: forgejo/docs!1639
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/10475
Reviewed-by: Mathieu Fenniak <mfenniak@noreply.codeberg.org>
Co-authored-by: Gusted <postmaster@gusted.xyz>
Co-committed-by: Gusted <postmaster@gusted.xyz>
When manually triggering a Forgejo Actions workflow, Forgejo always assumed the workflow directory to be `.forgejo/workflows`, even if the workflows were found in `.gitea/workflows` or `.github/workflows`. As a consequence, the executed workflows were misidentified in the UI. Furthermore, the context variable `${{ forgejo.workflow_ref }}`, which contains the full path to the workflow file, pointed to a non-existent file. The workflow directory is now determined dynamically. Existing database entries are left unmodified.
The screenshot shows the old behaviour for run 3 and the new, correct behaviour for run 4.
The PR is marked as WIP because it requires https://codeberg.org/forgejo/forgejo/pulls/10276 to be merged first.
## Checklist
The [contributor guide](https://forgejo.org/docs/next/contributor/) contains information that will be helpful to first time contributors. There also are a few [conditions for merging Pull Requests in Forgejo repositories](https://codeberg.org/forgejo/governance/src/branch/main/PullRequestsAgreement.md). You are also welcome to join the [Forgejo development chatroom](https://matrix.to/#/#forgejo-development:matrix.org).
### Tests
- I added test coverage for Go changes...
- [x] in their respective `*_test.go` for unit tests.
- [x] in the `tests/integration` directory if it involves interactions with a live Forgejo server.
- I added test coverage for JavaScript changes...
- [ ] in `web_src/js/*.test.js` if it can be unit tested.
- [ ] in `tests/e2e/*.test.e2e.js` if it requires interactions with a live Forgejo server (see also the [developer guide for JavaScript testing](https://codeberg.org/forgejo/forgejo/src/branch/forgejo/tests/e2e/README.md#end-to-end-tests)).
### Documentation
- [ ] I created a pull request [to the documentation](https://codeberg.org/forgejo/docs) to explain to Forgejo users how to use this change.
- [x] I did not document these changes and I do not expect someone else to do it.
### Release notes
- [ ] I do not want this change to show in the release notes.
- [ ] I want the title to show in the release notes with a link to this pull request.
- [ ] I want the content of the `release-notes/<pull request number>.md` to be be used for the release notes instead of the title.
<!--start release-notes-assistant-->
## Release notes
<!--URL:https://codeberg.org/forgejo/forgejo-->
- Bug fixes
- [PR](https://codeberg.org/forgejo/forgejo/pulls/10411): <!--number 10411 --><!--line 0 --><!--description Zml4KGFjdGlvbnMpOiByZXBsYWNlIGhhcmRjb2RlZCB3aXRoIGR5bmFtaWNhbGx5IGRldGVybWluZWQgd29ya2Zsb3cgZGlyZWN0b3J5-->fix(actions): replace hardcoded with dynamically determined workflow directory<!--description-->
<!--end release-notes-assistant-->
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/10411
Reviewed-by: Mathieu Fenniak <mfenniak@noreply.codeberg.org>
Reviewed-by: Cyborus <cyborus@disroot.org>
Co-authored-by: Andreas Ahlenstorf <andreas@ahlenstorf.ch>
Co-committed-by: Andreas Ahlenstorf <andreas@ahlenstorf.ch>
Make the variable `GITHUB_WORKFLOW_REF` available in Forgejo Action workflows. It is the ref path to the workflow and looks like `testowner/testrepo/.forgejo/workflows/test-workflow.yaml@refs/heads/main` ([GitHub documentation](https://docs.github.com/en/actions/reference/workflows-and-actions/variables)). GitHub Actions like [gh-action-pypi-publish](https://github.com/pypa/gh-action-pypi-publish) rely on its presence. See https://code.forgejo.org/forgejo/forgejo-actions-feature-requests/issues/56 for additional details.
`GITHUB_WORKFLOW_REF` cannot be generated easily during an action run. Either the path to workflow file has to be hardcoded or inferred by replicating the logic Forgejo uses to determine it. That is further complicated by the fact that Forgejo supports multiple search paths, namely `.forgejo/workflows`, `.gitea/workflows`, and `.github/workflows`. It is also the reason that the workflow directory is now stored in the database alongside the name of the workflow file.
Partial implementation is required in Forgejo Runner, see https://code.forgejo.org/forgejo/runner/pulls/1197.
Example workflow:
```yaml
on:
push:
workflow_dispatch:
schedule:
- cron: "* * * * *"
jobs:
test:
runs-on: ubuntu-latest
steps:
- run: |
echo "FORGEJO_WORKFLOW_REF=$FORGEJO_WORKFLOW_REF"
echo "GITHUB_WORKFLOW_REF=$GITHUB_WORKFLOW_REF"
echo "forgejo.workflow_ref=${{ forgejo.workflow_ref }}"
echo "github.workflow_ref=${{ github.workflow_ref }}"
```
## Checklist
The [contributor guide](https://forgejo.org/docs/next/contributor/) contains information that will be helpful to first time contributors. There also are a few [conditions for merging Pull Requests in Forgejo repositories](https://codeberg.org/forgejo/governance/src/branch/main/PullRequestsAgreement.md). You are also welcome to join the [Forgejo development chatroom](https://matrix.to/#/#forgejo-development:matrix.org).
### Tests
- I added test coverage for Go changes...
- [x] in their respective `*_test.go` for unit tests.
- [x] in the `tests/integration` directory if it involves interactions with a live Forgejo server.
- I added test coverage for JavaScript changes...
- [ ] in `web_src/js/*.test.js` if it can be unit tested.
- [ ] in `tests/e2e/*.test.e2e.js` if it requires interactions with a live Forgejo server (see also the [developer guide for JavaScript testing](https://codeberg.org/forgejo/forgejo/src/branch/forgejo/tests/e2e/README.md#end-to-end-tests)).
### Documentation
- [ ] I created a pull request [to the documentation](https://codeberg.org/forgejo/docs) to explain to Forgejo users how to use this change.
- [ ] I did not document these changes and I do not expect someone else to do it.
### Release notes
- [ ] I do not want this change to show in the release notes.
- [ ] I want the title to show in the release notes with a link to this pull request.
- [ ] I want the content of the `release-notes/<pull request number>.md` to be be used for the release notes instead of the title.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/10276
Reviewed-by: Mathieu Fenniak <mfenniak@noreply.codeberg.org>
Co-authored-by: Andreas Ahlenstorf <andreas@ahlenstorf.ch>
Co-committed-by: Andreas Ahlenstorf <andreas@ahlenstorf.ch>
* sets all cached ActivityPub users to ProhibitLogin
* creates a new UserType to uniquely identify users from ActivityPub
This has the side effect that ActivityPub users will no longer be listed in the admin view.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/10434
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: famfo <famfo@famfo.xyz>
Co-committed-by: famfo <famfo@famfo.xyz>
The rationale for keeping it behind a flag is due to fuzzy search being computationally intensive #5261
Admins may opt-in by setting the `[indexer].REPO_INDEXER_FUZZY_ENABLED` flag to true.
Closes#10331
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/10378
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: Shiny Nematoda <snematoda.751k2@aleeas.com>
Co-committed-by: Shiny Nematoda <snematoda.751k2@aleeas.com>
Followup to https://codeberg.org/forgejo/forgejo/pulls/9359. `templates/repo/issue/list.tmpl` had buttons changed which had `.disabled` on them conditionally.
* adjust devtest page to have such buttons
* implement `.disabled` for the newer buttons that does the same thing as the `.ui` buttons do: apply custom opacity, disable pointer events
* this is the most boring way of implementing this
Reported-by: @Gusted
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/10410
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Closes#9129. I decided to try myself in contributing to Forgejo after having found this bug mentioned on Fedi.
I have also added a basic test for this behaviour, but this means that this PR adds a SHA-256 repo to the fixture set, so it can be reused in other tests.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/10309
Reviewed-by: Lucas <sclu1034@noreply.codeberg.org>
Reviewed-by: 0ko <0ko@noreply.codeberg.org>
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: Nikita Karamov <me@kytta.dev>
Co-committed-by: Nikita Karamov <me@kytta.dev>
This PR fixes the issue https://codeberg.org/forgejo/forgejo/issues/10359
## Checklist
The [contributor guide](https://forgejo.org/docs/next/contributor/) contains information that will be helpful to first time contributors. There also are a few [conditions for merging Pull Requests in Forgejo repositories](https://codeberg.org/forgejo/governance/src/branch/main/PullRequestsAgreement.md). You are also welcome to join the [Forgejo development chatroom](https://matrix.to/#/#forgejo-development:matrix.org).
### Tests
- I added test coverage for Go changes...
- [x] in their respective `*_test.go` for unit tests.
- [x] in the `tests/integration` directory if it involves interactions with a live Forgejo server.
- I added test coverage for JavaScript changes...
- [ ] in `web_src/js/*.test.js` if it can be unit tested.
- [ ] in `tests/e2e/*.test.e2e.js` if it requires interactions with a live Forgejo server (see also the [developer guide for JavaScript testing](https://codeberg.org/forgejo/forgejo/src/branch/forgejo/tests/e2e/README.md#end-to-end-tests)).
### Documentation
- [ ] I created a pull request [to the documentation](https://codeberg.org/forgejo/docs) to explain to Forgejo users how to use this change.
- [ ] I did not document these changes and I do not expect someone else to do it.
### Release notes
- [ ] I do not want this change to show in the release notes.
- [ ] I want the title to show in the release notes with a link to this pull request.
- [ ] I want the content of the `release-notes/<pull request number>.md` to be be used for the release notes instead of the title.
<!--start release-notes-assistant-->
## Release notes
<!--URL:https://codeberg.org/forgejo/forgejo-->
- Bug fixes
- [PR](https://codeberg.org/forgejo/forgejo/pulls/10387): <!--number 10387 --><!--line 0 --><!--description Zml4KDEwMzU5KTogQ291bnQgcmVsZWFzZXMgY29ycmVjdGx5IHdoZW4gdXNpbmcgZmlsdGVycyAocSk=-->fix(10359): Count releases correctly when using filters (q)<!--description-->
<!--end release-notes-assistant-->
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/10387
Reviewed-by: Mathieu Fenniak <mfenniak@noreply.codeberg.org>
Co-authored-by: Rodrigo Villablanca <villa061004@gmail.com>
Co-committed-by: Rodrigo Villablanca <villa061004@gmail.com>
Follow-up of !8716 (and !9951)
A _More actions_ (`⋯`) dropdown (where content related actions are available) was added with !8716 for the moderation reports overview page. Until that PR was merged another PR (!9951) changed the structure of JS-less dropdowns and adjusted the CSS rules. This PR adds the missing `.content` container for the dropdown added with !8716
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/10339
Reviewed-by: 0ko <0ko@noreply.codeberg.org>
Co-authored-by: floss4good <floss4good@disroot.org>
Co-committed-by: floss4good <floss4good@disroot.org>
Fix a issue where the `/{owner}/{repo}/issues` and `/{owner}/{repo}/pulls` routes permitted the addition of extra characters in the URL.
Resolvesforgejo/forgejo#9954.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/10185
Reviewed-by: Lucas <sclu1034@noreply.codeberg.org>
Reviewed-by: oliverpool <oliverpool@noreply.codeberg.org>
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: Adora <me@adora.codes>
Co-committed-by: Adora <me@adora.codes>
Closes#10078 and includes another small improvement (for comments and issues/PRs the title from report/s details page already included the poster name; now it will clickable, opening the poster profile page).
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/10194
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: floss4good <floss4good@disroot.org>
Co-committed-by: floss4good <floss4good@disroot.org>
Followup to https://codeberg.org/forgejo/forgejo/pulls/2528
Instead of storing translated strings in memory, store raw numbers and translate at template rendering time.
Our implementation of `TrSize` is not very efficient and is more expensive than just the underlying `humanize.IBytes`, but for me on localhost both ways render response to HTMLX's request to `/admin/system_status` in 0-1 ms.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/10358
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: 0ko <0ko@noreply.codeberg.org>
Co-committed-by: 0ko <0ko@noreply.codeberg.org>
On the page displaying the logs of an action run attempt, the header directly above the logs always showed the status of the job. That resulted in the wrong status being displayed for previous run attempts.
Fixes https://codeberg.org/forgejo/forgejo/issues/10236.
## Checklist
The [contributor guide](https://forgejo.org/docs/next/contributor/) contains information that will be helpful to first time contributors. There also are a few [conditions for merging Pull Requests in Forgejo repositories](https://codeberg.org/forgejo/governance/src/branch/main/PullRequestsAgreement.md). You are also welcome to join the [Forgejo development chatroom](https://matrix.to/#/#forgejo-development:matrix.org).
### Tests
- I added test coverage for Go changes...
- [x] in their respective `*_test.go` for unit tests.
- [x] in the `tests/integration` directory if it involves interactions with a live Forgejo server.
- I added test coverage for JavaScript changes...
- [x] in `web_src/js/*.test.js` if it can be unit tested.
- [x] in `tests/e2e/*.test.e2e.js` if it requires interactions with a live Forgejo server (see also the [developer guide for JavaScript testing](https://codeberg.org/forgejo/forgejo/src/branch/forgejo/tests/e2e/README.md#end-to-end-tests)).
### Documentation
- [ ] I created a pull request [to the documentation](https://codeberg.org/forgejo/docs) to explain to Forgejo users how to use this change.
- [ ] I did not document these changes and I do not expect someone else to do it.
### Release notes
- [ ] I do not want this change to show in the release notes.
- [ ] I want the title to show in the release notes with a link to this pull request.
- [ ] I want the content of the `release-notes/<pull request number>.md` to be be used for the release notes instead of the title.
<!--start release-notes-assistant-->
## Release notes
<!--URL:https://codeberg.org/forgejo/forgejo-->
- Bug fixes
- [PR](https://codeberg.org/forgejo/forgejo/pulls/10321): <!--number 10321 --><!--line 0 --><!--description ZGlzcGxheSBhY3Rpb24gcnVuIGF0dGVtcHQgc3RhdHVzIGluc3RlYWQgb2Ygam9iIHN0YXR1cw==-->display action run attempt status instead of job status<!--description-->
<!--end release-notes-assistant-->
Co-authored-by: Mathieu Fenniak <mathieu@fenniak.net>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/10321
Reviewed-by: Mathieu Fenniak <mfenniak@noreply.codeberg.org>
Co-authored-by: Andreas Ahlenstorf <andreas@ahlenstorf.ch>
Co-committed-by: Andreas Ahlenstorf <andreas@ahlenstorf.ch>
The package cleanup routine checks every container version for whether it is referenced by a multi-platform manifest, which appears to be a performance problem indicated by CPU profiling collected in #9358 on SQLite systems. This PR removes that check completely, which isn't necessary since #4698 added a much more performant mass-cleanup of these dangling platform versions.
May fix#9358 completely, but it leaves fundamental scalability concerns with SQLite due to long-running transactions. The transactions will be shorter with this change. Requires end-user testing to confirm if sufficiently fixed.
## Checklist
The [contributor guide](https://forgejo.org/docs/next/contributor/) contains information that will be helpful to first time contributors. There also are a few [conditions for merging Pull Requests in Forgejo repositories](https://codeberg.org/forgejo/governance/src/branch/main/PullRequestsAgreement.md). You are also welcome to join the [Forgejo development chatroom](https://matrix.to/#/#forgejo-development:matrix.org).
### Tests
- I added test coverage for Go changes...
- [x] in their respective `*_test.go` for unit tests.
- [x] in the `tests/integration` directory if it involves interactions with a live Forgejo server.
- I added test coverage for JavaScript changes...
- [ ] in `web_src/js/*.test.js` if it can be unit tested.
- [ ] in `tests/e2e/*.test.e2e.js` if it requires interactions with a live Forgejo server (see also the [developer guide for JavaScript testing](https://codeberg.org/forgejo/forgejo/src/branch/forgejo/tests/e2e/README.md#end-to-end-tests)).
### Documentation
- [ ] I created a pull request [to the documentation](https://codeberg.org/forgejo/docs) to explain to Forgejo users how to use this change.
- [x] I did not document these changes and I do not expect someone else to do it.
### Release notes
- [ ] I do not want this change to show in the release notes.
- [x] I want the title to show in the release notes with a link to this pull request.
- [ ] I want the content of the `release-notes/<pull request number>.md` to be be used for the release notes instead of the title.
<!--start release-notes-assistant-->
## Release notes
<!--URL:https://codeberg.org/forgejo/forgejo-->
- Bug fixes
- [PR](https://codeberg.org/forgejo/forgejo/pulls/10297): <!--number 10297 --><!--line 0 --><!--description cmVkdWNlIHJ1bnRpbWUgb2YgY29udGFpbmVyIGNsZWFudXAgYnkgcmVseWluZyBvbiBtYXNzIGRpZ2VzdCBjbGVhbnVw-->reduce runtime of container cleanup by relying on mass digest cleanup<!--description-->
<!--end release-notes-assistant-->
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/10297
Reviewed-by: Michael Kriese <michael.kriese@gmx.de>
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Mathieu Fenniak <mathieu@fenniak.net>
Co-committed-by: Mathieu Fenniak <mathieu@fenniak.net>
Modifies the parsed URL after the error check.
Avoids a potential `nil`-pointer de-reference if an invalid URL string argument is provided. No current code path triggers the `nil`-pointer de-reference.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/10204
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: elle <0xllx0@noreply.codeberg.org>
Co-committed-by: elle <0xllx0@noreply.codeberg.org>
* in both `/admin` and `/admin/cron`: use new buttons, they are slightly more compact, which i think fits this place well as currently rows here feel too tall
* in `/admin/cron`: use `octicon-play` consistently with `/admin` instead of `octicon-triangle-right`
* in `/admin`: replace verbose template HTML with Range-based generator
* added integration test to verify page content
<!--start release-notes-assistant-->
## Release notes
<!--URL:https://codeberg.org/forgejo/forgejo-->
- User Interface features
- [PR](https://codeberg.org/forgejo/forgejo/pulls/10270): <!--number 10270 --><!--line 0 --><!--description ZmVhdCh1aSk6IGltcHJvdmUgYWRtaW4gZGFzaGJvYXJkIGNyb24gbGlzdA==-->feat(ui): improve admin dashboard cron list<!--description-->
<!--end release-notes-assistant-->
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/10270
Reviewed-by: Michael Kriese <michael.kriese@gmx.de>
Reviewed-by: Otto <otto@codeberg.org>
Co-authored-by: 0ko <0ko@noreply.codeberg.org>
Co-committed-by: 0ko <0ko@noreply.codeberg.org>
* show/hide resolved: got rid of classes `ui labeled button` - ignoring them overriding each other, they were contributing three useful CSS properties in total:
```css
padding: 0;
background: none;
font-weight: 500;
```
and were also contributing an undesired margin:
* also fixed inconsistent font size between two views
* additionally got rid of verbose fomantic classes since there was already a rule that could accept their properties
* got rid of unused class `add-code-comment-right`
* added testing for the hide/show/resolve/unresolved buttons, but not related to CSS, just thought it might be useful
<!--start release-notes-assistant-->
## Release notes
<!--URL:https://codeberg.org/forgejo/forgejo-->
- User Interface changes without a feature or bug label
- [PR](https://codeberg.org/forgejo/forgejo/pulls/10268): <!--number 10268 --><!--line 0 --><!--description Y2hvcmUodWkpOiBjbGVhbnVwIHJldmlld3MgY3NzLCBpbXByb3ZlIGNvbnNpc3RlbmN5-->chore(ui): cleanup reviews css, improve consistency<!--description-->
<!--end release-notes-assistant-->
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/10268
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Reviewed-by: Otto <otto@codeberg.org>
Co-authored-by: 0ko <0ko@noreply.codeberg.org>
Co-committed-by: 0ko <0ko@noreply.codeberg.org>
This PR migrates the unmaintaiend `lib/pq` library to `jackc/pgx`, which is the de-facto standard lib in go for postgres connections these days.
Some implementation notes:
We register both `pgx` and `postgresschema` driver names (for backward comp). We can't register `postgres` as this one is still used by `lib/pq` imported by `go-chi/session`, which is in use when users go for the "postgres" session type in the "Session config.
It is questionable if anyone is really using the "postgres" driver option in the session config - but for consistency, it would be good to also migrate to `pgx` there, especially as the code lives within Forgejo under [go-chi/session](https://code.forgejo.org/go-chi/session).
`pgx` supports multi-host notation in the connection string. New tests have been added therefore.
`pgx` also allows for connection string parameters such as `?default_query_exec_mode=simple_protocol`. This should possibly allow running with `pgbouncer` "transaction" mode instead of "session", which could substantially enhance Postgres query handling.
## Checklist
### Tests
- I added test coverage for Go changes...
- [x] in their respective `*_test.go` for unit tests.
- [ ] in the `tests/integration` directory if it involves interactions with a live Forgejo server.
- I added test coverage for JavaScript changes...
- [ ] in `web_src/js/*.test.js` if it can be unit tested.
- [ ] in `tests/e2e/*.test.e2e.js` if it requires interactions with a live Forgejo server (see also the [developer guide for JavaScript testing](https://codeberg.org/forgejo/forgejo/src/branch/forgejo/tests/e2e/README.md#end-to-end-tests)).
### Documentation
- [ ] I created a pull request [to the documentation](https://codeberg.org/forgejo/docs) to explain to Forgejo users how to use this change.
- [x] I did not document these changes and I do not expect someone else to do it.
### Release notes
- [ ] I do not want this change to show in the release notes.
- [x] I want the title to show in the release notes with a link to this pull request.
- [ ] I want the content of the `release-notes/<pull request number>.md` to be be used for the release notes instead of the title.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/10219
Reviewed-by: Mathieu Fenniak <mfenniak@noreply.codeberg.org>
Co-authored-by: pat-s <patrick.schratz@gmail.com>
Co-committed-by: pat-s <patrick.schratz@gmail.com>
